Regular Maintenance Keeps Big Rig Tires Rolling

Because a commercial large truck covers many hard miles over the life of a set of tires, choosing the right rubber is crucial for efficient and safe operation.However much you invest in your tires, you can maintain even tread depth and make themlast longer by performing regular visual checks and ongoing maintenance. Keep your truck on the straight and narrow by performing the following routine checks and maintenance.

Regular Maintenance Keeps Big Rig Tires Rolling

Do Not Skip Alignment

When you first install tires, they will not run straight as a matter of course. It is not worth trying to save money by skipping truck alignment Dallas TX. Otherwise, you will experience uneven treadwear and unstable, dangerous tracking. Additionally, after many miles over pothole-strewn roads, your tires will need to be checked for alignment and balance once again.

Rotate Regularly

Because the weight load varies, front and rear truck tires wear differently. At regular intervals have your tires rotated. Distinct brands and types of tires may require special rotations, so check with the manufacturer and your trusted fleet management service managers.

READ ALSO :  Why Consider a Career in Truck Driving?

Get Out the Gauge

If your truck pulls, alignment might not be the problem; one or more of the tires may be underinflated or overinflated. This condition can not only make driving more strenuous, but also more dangerous. Tires low on air can suffer blowouts caused by road obstacles or friction-induced overheating.

Be Your Own Inspector

Visually check your tires before each job and during rest stops. Look for cracks, unusually wear or road debris that may be stuck in the treads. Look at the tires from the rear and front as well as the sides to note any bulges, conditions that can lead to catastrophic failures.

A loaded semi-truck can weigh as much as 18,000 pounds. Sometimes, the main factor in keeping your truck on the road is performing appropriate tire maintenance; by following the right steps, you can ensure that you and all that moving mass arrive safely at your destination.

You may also like...

Leave a Reply